The following are steps in details：
Step 1 : Download App
Scan the QR code below to download and install Hover X1 APP.
Step 2 : Charge the battery
Before you use HOVERAir X1 for the first time, be sure to charge it.
Video tutorial on charging your battery here:
Step 3 : Power on
Press and hold the power button for 2 seconds until the voice prompt is heard, and the green status indicator turns on.
Step 4 : Mode selection and fly
Open the HOVERAir X1 enclosureas shown below. You can switch modes using the mode button. Hold HOVERAir X1 horizontally. Short press the power button.
All propellers will start spinning. Release HOVERAir X1 and it will take off and perform the selected flight path.
Take off
Step 5: Landing HOVERAir X1
Place your hand 20cm below HOVERAir X1 when it is finished with its flight path, and it will automatically land on your hand.
Caution
DO NOT stick any finger or anything else into the propellers area. Please refer to the safety instruction manual and disclaimer on zzrobotics.com/ support for more information.
To stop the HOVERAir mid-flight, you can grab it from the air and press the power button or flip it by 180° to stop the propellers.
Step 6 Connect to the App
Open the Hover X1 App and use it to download your content or adjust flight parameters.
